Electrical steel for motor and generator

CRNGO 50HW600 1. Low iron loss 2. High magnetic flux strength 3. High lamination factor 4. Smooth surface

CRNGO W470 1. Low iron loss 2. High magnetic flux strength 3. High lamination factor 4. Smooth surface

Benefits:

1. Decreases wasteful dissipation of energy

2. Warrant stress relieving

3. Large laminations

4. Minimizes the physical dimensions of the increasingly powerful equipment now demanded.

----------------------------------------------------------

Specifications:

1. Grades: W470

2. Thickness: 0.5mm

3. Width: 950mm

----------------------------------------------------------

Parameters:

1. Density: 7.70kg/dm3

2. Iron Loss: 4.034W/Kg (f=50Hz B=1.5T)

3. Magnetic Flux Strength: 1.645T ((f=50Hz H=5000A/M))

4. Surface Insulation Resistance: 300Ω/mm2

5. Tensile Strength: Extended Length 35% (380MPa)

6. Lamination Factor: 97%

7. Minimum number of Bends: 10Times

----------------------------------------------------------

Applications:

1. Small relays

2. Pulse transformers

3. Generators

4. Motors

5. Transformers

6. Power distribution

7. Ballast

8. Instrument

9. Audio

10. Generators for steam turbine and water wheels

----------------------------------------------------------

Characteristics:

1. Low iron loss, high magnetic flux strength, comes up to the international advance standard.

2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.

3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.

4. Processing Performance: easily punched and cut, high dimensional accuracy.

5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.

6. Has been SGS approved, in accordance with various domestic and international environmental regulations.

Electrical steel for motor and generator